Meter Reading

STEP 1   Locate your meter box, generally found towards the front of a property, near the street. The box is typically in a direct line with the main outside faucet. It is housed in a concrete box usually marked "water". Remove the lid by using a tool such as a large screwdriver. Insert the tool into one of the holes and pry the lid off.

STEP 2   Once you open the meter box lid on the face of the meter there is a digital display of numbers. Read the number display from left to right and stop at the decimal point. The reading is in gallons so for example 25167 would be 25,167 gallons. This is your meter reading. Meters measure water in gallons or cubic feet. Charges for the amount of water consumed are billed for every gallon used during a billing period. Compare that reading to what your bill states as your current or present reading.

STEP 3   Keep in mind that you might be checking your meter on a date different from the one used for billing. This could result in a difference in the amount you find, compared with the amount on which your bill is based. However, if your reading is considerably higher than what is on your bill, check for a leak or try to determine the source of large water use. If your reading is significantly lower than the reading on your bill, please contact us and let us assist you in determining the problem.

Kamstrup Display Kamstrup Display